MP1100 Series

Online UPS

Low Frequency

Transformer Based 1/1 Phase UPS

Cabinet power range 15 kVA, 20 kVA and 30 kVA.

MP1100 series UPS adopt the globally most advanced DSP digital control technique, with voice call send-alerting alarming function, a high-speed microprocessor (MCU), a programmable logic device (CPLD), the sixth generation IGBT and static state switch. Combined it has a dissipation with exhausts HP high power, which enters into deducing digital ages of classic legend, bring up with the big capacity, high reliability, the stability of function to reside global top-grade level.

MP1100 series UPS’s 15kVA, 20kVA and 30kVA, by means of 100% network environments adaptability, which are widely used in the network office environment of following sides such as BCS billing center of communications, BCS BTS communication stations, the banking business outlets, ATM cash dispensers, stock exchange firms, transportation, electric power, industry and any other profession vocation.

ModelMP1115KMP1120KMP1130K
Capacity15kVA20kVA30kVA
Power Watt12kW16kW24kW
Working PrincipalLow-Frequency Transformer Based True On Line-Double ConversionLow-Frequency Transformer Based True On Line-Double ConversionLow-Frequency Transformer Based True On Line-Double Conversion
RECTIFIER (INPUT)
PhaseSingle PhaseSingle PhaseSingle Phase
Input Power Factor≧0.9 (Plus Filter)≧0.9 (Plus Filter)≧0.9 (Plus Filter)
Input Voltage Range220VAC (230VAC or 240VAC) ±25%,
1P+N+PE optional 110V (120V or 277V)
220VAC (230VAC or 240VAC) ±25%,
1P+N+PE optional 110V (120V or 277V)
220VAC (230VAC or 240VAC) ±25%,
1P+N+PE optional 110V (120V or 277V)
Input Frequency Range50Hz ±10%
60Hz ±10% (Selectable)
50Hz ±10%
60Hz ±10% (Selectable)
50Hz ±10%
60Hz ±10% (Selectable)
Output Ripple Less than 2% Less than 2% Less than 2%
Soft Start0 up to 100% 5sec0 up to 100% 5sec0 up to 100% 5sec
CHARGING
Charging ModeConstant current, then constant voltage, and charge with temperature compensationConstant current, then constant voltage, and charge with temperature compensationConstant current, then constant voltage, and charge with temperature compensation
Float Charging Voltage220VDC220VDC220VDC
Equalized Charging Voltage227VDC227VDC227VDC
Temp. Compensated Voltage-3mV / ℃ / Cell-3mV / ℃ / Cell-3mV / ℃ / Cell
Charging Current5 – 10A5 – 10A5 – 10A
BATTERY
TypeVRLA / AGM / Gel,
optional Lithium Battery
VRLA / AGM / Gel,
optional Lithium Battery
VRLA / AGM / Gel,
optional Lithium Battery
Battery Capacity7 up to 999AH settable (Configure Battery Capacity according to Back-up Time)7 up to 999AH settable (Configure Battery Capacity according to Back-up Time)7 up to 999AH settable (Configure Battery Capacity according to Back-up Time)
Quantity16 units 12V or 96 units 2V batteries
(Battery Voltage 192VDC)
16 units 12V or 96 units 2V batteries
(Battery Voltage 192VDC)
16 units 12V or 96 units 2V batteries
(Battery Voltage 192VDC)
Temperature20ºC up to 25ºC (For Maximum Efficiency)20ºC up to 25ºC (For Maximum Efficiency)20ºC up to 25ºC (For Maximum Efficiency)
INVERTER (OUTPUT)
PhaseSingle PhaseSingle PhaseSingle Phase
Nominal Voltage220VAC (230VAC or 240VAC),
1P + N optional 110V (120V or 277V)
220VAC (230VAC or 240VAC),
1P + N optional 110V (120V or 277V)
220VAC (230VAC or 240VAC),
1P + N optional 110V (120V or 277V)
Output Voltage Regulated Accuracy±1% (Stable load)
±3% (Fluctuant load)
±1% (Stable load)
±3% (Fluctuant load)
±1% (Stable load)
±3% (Fluctuant load)
Output Frequency Range50Hz – 60Hz less than ±0.5% (Asynchronous)50Hz – 60Hz less than ±0.5% (Asynchronous)50Hz – 60Hz less than ±0.5% (Asynchronous)
Crest FactorGreater than 3:1Greater than 3:1Greater than 3:1
Output Total Harmonic

Distortion (THD)

Pure Sine Wave
Linear Load less than 3%
Non-Linear Load less than 5%
Pure Sine Wave
Linear Load less than 3%
Non-Linear Load less than 5%
Pure Sine Wave
Linear Load less than 3%
Non-Linear Load less than 5%
Dynamic CharacteristicsInstant voltage less than ±5% (0 – 100%)
Instant recover time less than 10ms
Instant voltage less than ±5% (0 – 100%)
Instant recover time less than 10ms
Instant voltage less than ±5% (0 – 100%)
Instant recover time less than 10ms
Overload CapacityAt 115% load, normal work
At 125% load 10 min
At 150% load 1min
At 200% load 1sec
At 115% load, normal work
At 125% load 10 min
At 150% load 1min
At 200% load 1sec
At 115% load, normal work
At 125% load 10 min
At 150% load 1min
At 200% load 1sec
Inverter EfficiencyGreater than 92% (full load)Greater than 92% (full load)Greater than 92% (full load)
BYPASS
PhaseSingle Phase (P+N)Single Phase (P+N)Single Phase (P+N)
Nominal Voltage220VAC (230VAC or 240VAC)
optional 110V (120V or 277V)
220VAC (230VAC or 240VAC)
optional 110V (120V or 277V)
220VAC (230VAC or 240VAC)
optional 110V (120V or 277V)
Transfer Time0ms (adopt static switch)0ms (adopt static switch)0ms (adopt static switch)
PROTECTION FUNCTION
Input ProtectionInput voltage, frequency over limited protectionInput voltage, frequency over limited protectionInput voltage, frequency over limited protection
Output ProtectionOver current, short circuit, over voltage, low voltageOver current, short circuit, over voltage, low voltageOver current, short circuit, over voltage, low voltage
Battery ProtectionOver charge, over-discharge protectionOver charge, over-discharge protectionOver charge, over-discharge protection
Temperature ProtectionEnvironment over temperature protection, inverter over temperature protectionEnvironment over temperature protection, inverter over temperature protectionEnvironment over temperature protection, inverter over temperature protection
Hardware Fault ProtectionAssistant power abnormal, breaker cut off, breaker overload, power devices over current/over voltage etc. protectionAssistant power abnormal, breaker cut off, breaker overload, power devices over current/over voltage etc. protectionAssistant power abnormal, breaker cut off, breaker overload, power devices over current/over voltage etc. protection
GENERAL SYSTEM PARAMETERS
Working EnvironmentTemp: -10 up to 40ºC,
Relative humidity: 30% up to 90%
Altitude less than 2000m (1% decrease against 100m rise, Max. altitude 4000m)
Temp: -10 up to 40ºC,
Relative humidity: 30% up to 90%
Altitude less than 2000m (1% decrease against 100m rise, Max. altitude 4000m)
Temp: -10 up to 40ºC,
Relative humidity: 30% up to 90%
Altitude less than 2000m (1% decrease against 100m rise, Max. altitude 4000m)
Cooling MethodCOMPULSIVE VENTILATIONCOMPULSIVE VENTILATIONCOMPULSIVE VENTILATION
Communication InterfaceRS232 / RS485, optional dry contact, SNMP card (for remote control via internet)RS232 / RS485, optional dry contact, SNMP card (for remote control via internet)RS232 / RS485, optional dry contact, SNMP card (for remote control via internet)
Parallel OperationTandem hot backupTandem hot backupTandem hot backup
Auto-surge Capacity10 / 700μS
5KV; 8 / 20μS
20KA
10 / 700μS
5KV; 8 / 20μS
20KA
10 / 700μS
5KV; 8 / 20μS
20KA
Protection LevelIP21IP21IP21
Safety PerformanceVin-n Vout-n 2000Vac, creepage less than 10mA, insulating resistance greater than 2MΩ (500VDC)Vin-n Vout-n 2000Vac, creepage less than 10mA, insulating resistance greater than 2MΩ (500VDC)Vin-n Vout-n 2000Vac, creepage less than 10mA, insulating resistance greater than 2MΩ (500VDC)
Noise (dB)55 up to 6055 up to 6055 up to 60
Dimension (W*D*H) mm450 * 600 * 1200450 * 600 * 1200450 * 600 * 1200
Weight (Kg)186201251

NOTE: Subject to changes without further notice!

© Copyright - Baykee Australasia